9
D041878
CR5200
User Manual
1
2
.0
-
CR5200 Age Verifcation
Scenario
Top LED Light
Sound
If a valid ID is read and the patron’s age is equal to or greater
than the primary age.
Flashes green
Ascending three-beep tone
If a valid ID is read and the patron is under the secondary age,
or the ID is expired.
Flashes red
Long, low tone
If a valid ID is read, and the patron’s age is greater than or
equal to the secondary age, but less than the primary age.
Note:
The
CR52
15
will also give this indication if an ID isn’t
properly formatted.
Flashes yellow
Alternating beeps
Note: If the secondary age is set higher than the primary age, it is ignored.
If you have questions about a specific Identification or Driver License, please contact [email protected]
1
1
.0
-
Reader ID and
F
irmware Version
You will see a text string indicating your firmware version and
CR5200
ID numbe
r
.
example: <RD><RR MD=”
CR5200
” /></RD><RD><RR SN=”10
7
0000003” /></RD><RD><FW VS=”1.
3
.
3
” /></RD><RD><LC GL=”” /></RD>
For device management and obtaining support from Code, reader information
will be needed. To find out the Reader ID, firmware version and optiona
l
licenses,
open a text editor program (i.e., Notepad, Microsoft Word, etc.) and
scan the Reader ID and Firmware configuration barcode on the right
.
Reader ID, Firmware and Licenses
Note: Code will periodically release new firmware for
CR5200
readers. For information on latest firmware visit
the
product page on
our website at
codecorp.com/products/code-reader-
5200
.
Model Number
Serial Number
Firmware
Version
Number
License Part Number
(if there is any)
<RD><RR
MD=”CR
5200
”
/></RD><RD><RR SN=”10
7
0000003” /></RD><RD><
FW VS=”1.
3
.
3
” /></RD><RD><
LC GL=”” /></RD>
The CR5200 (Model# CR5215) is a stand-alone age verification solution that does not require a PC or manual management of data to alert a clerk of
an underage patron. When reading an AAMVA-compliant barcoded Driver License, the CR52
15
is enabled by default to alert users if a patron is under
the age of 21.
The CR52
15
verifies the age of a patron using its Real Time Clock (RTC) which is set during the manufacturing process. The RTC can be changed to
reflect local time, the primary minimum age setting can be changed, and a secondary age set with the online Configuration Generator found at
https://www.codecorp.com/support/config-guides,
or with the CortexTools
2
® utility that can be downloaded at
www.codecorp.com/products/
code-reader-5200
.
As noted, the default setting for the CR52
15
is that the primary age is set to 21.
The secondary age is 18.
In this configuration, if a valid ID is read
and the patron’s age is equal to or greater than the primary age, the CR52
15
will flash the Green LED and play an ascending three-beep tone. If a
valid ID is read and the patron is under the primary age, or the ID is expired, the CR52
15
will flash the Red LED and play a long, low tone.
If the secondary age is set, it tells the reader to test for an age range. For instance, if the primary age is set to 21 and the secondary age is set to 18,
then:
