16
D032263_03_CR2700_User_Manual
5.10.2
The batteries can also be charged using the Quad-Bay battery charger (CRAA274). Connect
the Quad-Bay charger to the power supply provided for the charger and plug the power supply to an
AC power source. Insert batteries into the charger (Figure 12). The batteries will start charging as
the Power Gauge LEDs start flashing 4 seconds on and 1 second off. The LEDs will stay solid on
when a battery is fully charged. The battery will be fully charged in approximately 4 hrs when using
the quad-bay battery charger.
Please note
:
the temperature range to charge the battery is 0°C – 40°C (32°F – 104°F). Although
the reader will operate beyond this range, the battery may not charge properly. To avoid temperature
related battery issues, always charge the battery and operate the reader between 0°C – 40°C (32°F –
104°F).
Please note
:
It is normal that the area around the serial label on the reader becomes warm during
charging.
For long-term storage or shipping, please remove the battery from the reader or the Quad-bay charger.
Figure 12: Charging B27 Batteries in a Quad-Bay Charger
5. Unpacking & Installation (continued)
