5
D008736_04 CortexOPOS User Manual
5.1
- Download the
OPOSinstaller.zip file available
from
codecorp.com/downloads
.
5.2
- Run the
CortexOPOSSetup
executable, and
press
Next
when the screen below opens.
5.3
- Accept the
Terms & Conditions
and select
Next
.
5.4
- You can specify a generic CortexOPOS
TM
device
be created during installation. Keep the check-
box checked if you want the device created and
designate a device name in the text box. Uncheck
the box to skip the device creation step (device
will need to be created later in Device Manager).
Select the desired options and click
Next
. (
Note:
If a generic CortexOPOS
TM
device has been created
previously, this screen will not be shown.
)
5.5
- Select
Install
, then
Finish
to complete the
installation process.
At this point, the CortexOPOS
TM
service object is
installed. Prior to using a Code barcode reader with
the OPOS software, it must be configured for OPOS
operation (see Section 6 or 7).
5.0 - Installation
If a generic device was created as part of the instal-
lation, the OPOS software application should be
able to connect to a properly configured device. If a
generic device was not created, then the
CortexOPOS
TM
Device Manager application must be
used to configure a Code device for use with OPOS.
