Code Code Reader 822 Series, Руководство по интеграции

Страница: 7 / 33

7
D026227_08 CR822x Single Board Decoded Scan Engine Integration Guide
2.5 – Imager with Mounting Tab Mechanical Specifications
1. In addition to the four blind holes (two
on top and two on bottom) available
for mounting with self-tapping screws,
the Imager with mounting tabs has two
2.50mm [.098”] clearance holes.
2. Please use #1-32 Trilobular ® thread forming
screw or M1.8 Delta PT ® thread forming
screw, with the following dimensions:
Minimum Maximum
Thread Engagement 2.00 mm [.079”] 2.50 mm [.098”]
Length (B)
Mounting Substrate
Thickness (A) + 2.00 mm Mounting Substrate
Thickness (A) + 2.50 mm
Torque N/A 1.5 Ibf-in
4X Ø1.65
[.065]
3.00
[.118]
2X Ø2.50 [.098]
[.039]
1.00
[.196]
4.99
[.469]
11.90
[.138]
3.50
UNITS = MM [INCHES]
*Dimension will change based on focus.
Decrease for far focus; increase for near focus.
2.50 MAX
2.00 MIN
(3.00)
A
B
(Ø1.65)
(Ø2.00) #1-32 OR
M1.8 SCREW
MOUNTING
SUBSTRATE
C8200
HOUSING
[1.024]
26.00
[.512]
13.00
[.536]
13.63
*
[1.244]
31.60
A
PIN 1
FRONT VIEW SIDE VIEW
TOP VIEW
BACK VIEW
MOLEX CONNECTOR
P/N: 51338-0374