D042421v1 CR7010 User Manual
8
Copyright © 2021 Code Corporation. All rights reserved. iPhone® is a registered trademark of Apple Inc.
CODE READER
7010
Battery Best Practices
To efficiently use the CR7010 case and battery, the iPhone should be kept at or near full charge. The CRA-B710 battery
should be used for power draw and swapped when nearly depleted. The case is designed to keep the iPhone charged.
Placing a fully-charged battery into a case with a half or nearly dead iPhone makes the battery work overtime, creating
heat and draining power rapidly from the battery. If the iPhone is kept at a nearly full charge, the battery slowly delivers
current to the iPhone allowing the charge to last longer. The CRA-B710 battery will last approximately 6 hours under high-
power consumption workflows.
Take note that the amount of power draw depends upon the applications being actively used or open in the background.
For maximum battery usage, exit unneeded applications and dim the screen to approximately 75%. For long-term storage
or shipping, remove the battery from the case.
Maintenance and Troubleshooting
Approved Disinfectants
Please review the
Routine Cleaning and Disinfection
The iPhone screen and screen protector should be kept clean to maintain device responsiveness. Thoroughly clean the
iPhone screen and both sides of the CR7010 case cover before installing the iPhone as they can get dirty.
Approved medical disinfectants can be used to clean the CR7010 case and charging bays.
• Ensure the screen shield is correctly snapped shut.
• Use disposable wipe cloth or apply cleaner to paper towel, then wipe.
• Do not submerge the case in any liquid or cleaner. Simply wipe it with the approved cleaners and allow it to air dry or
wipe dry with paper towel.
• For charging docks, remove all batteries before cleaning; do not spray cleaner into the charging wells.
Troubleshooting
If the case isn’t communicating to the phone, restart the phone, remove and reinsert the battery and/or remove the phone
from the case and reinsert it. If the battery indicator does not respond, the battery may be in shutdown mode due to low
power. Charge the case or battery for approximately 30 minutes; then check if the indicator is providing feedback.
Contact Code for Support
For product issues or questions, please contact Code’s support team at
.
Warranty
The CR7010 comes with a 1-year standard warranty.
Legal Disclaimer
Copyright © 2021 Code Corporation. All Rights Reserved.
The software described in this manual may only be used in accordance with the terms of its license agreement.
