Wiring Connections
Installation Procedure
LED
BEEPER
D0
D1
+12V
GND
Reader Wire
Blue
Yellow
Green
White
Red
Black
Connect with controller LED
Connect with controller beeper
WG output line D0
WG output line D1
Power 12V
Power supply GND
*Note
To activate the sounder during the operation of the LED changing to
Green, connect the Yellow Buzzer wire to “BUZ” on the controller.
Colour
Controller Connection
STEP 1
STEP 2
Remove the back cover from the keypad
using the supplied special screw driver
Gently pull the metal back plate cover
away from the main body of the reader.
• Drill 2 holes on the wall for the Self
tapping screws and I hole for the
cable
• Put the supplied rubber bungs to into
the two holes
• Fix the back cover firmly on the wall
with 2 Self tapping screws
• Thread the cable through the cable
hole, connect the wire needed, wrap
unused wire with insulating
tape isolated to prevent short circuit
• Attach the keypad to the back cover.
STEP 3
”BUZ” input on controller
