
5
C007555_05_CR900FD_ConfigurationGuide
CR900FD Configuration Guide
NOTE:
The configuration change will take effect immediately and saved to memory.
Save Settings
Reader ID and
Firmware Version
Beep Volume 100% - Default
Beep Volume 67%
(applicable for readers with
firmware version 0454 and newer)
Continuous Scan Off - Default
Motion Detection On,
Start Delay 500ms
Motion Detection On,
Start Delay 0 - Default
Motion Detection On,
Start Delay 0,
Dark Environment
Motion Detection On,
Start Delay 500ms,
Dark Environment
Motion Detection
Scanning Off
Duplicate Scan Disabled
1 sec Duplicate Scan Delay
2 sec Duplicate Scan Delay
3 sec Duplicate Scan Delay
Default Trigger Delay
Targeting Off
Targeting On
Continuous Scan On
Disable Motion Detection with
Stand Detection
Enable Motion Detection with
Stand Detection - Default
Intentionally Left Blank
Intentionally Left Blank
Beep Volume 33%
(applicable for readers with
firmware version 0454 and newer)
Beep Volume 0%
(applicable for readers with
firmware version 0454 and newer)