Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-145-E
page 14 of 23
IA3100
Administrator Guide
39
Commands During a Call
– This command
will enable or disable the operator from using
the commands during a call. This feature is only
usable with the FP1 or FP2 style faceplate.
39<<mode>># / Default = 1
0 = Disable
1 = Enable
43
Ring time counter
– This command sets the
amount of time that the IA3100 will wait for a call
to be answered before moving on to the next
number. (00-60 seconds)
43<<Ring time (two digits)>># /
Default = 30
44
Slave auxiliary output #2
with auxiliary output
#1.
44 / Default
45
Disable command 44
45
46
Enables auto connection
of auxiliary output
#2 during incoming calls. (This command is not
available if auxiliary output #2 is slaved.)
46
47
Disable command 46
47 / Default
48
Time the auxiliary output #2 stays active
. Time
starts from the time auxiliary output #2 becomes
active (i.e. command 6 or command 46)
48<<Active time (two digits)>>#
/ Default = 00
00=ends when call ends
01-89=ends after 1-89 minutes
90-99=5-50 seconds
(90=5 sec. / 91=10 sec. / 92=15
sec. / etc.)
50
First phone number for “Push for help” or
“Emergency” button
50<<1
st
Emergency number>>#
Up to 16 digits
=2-second pause
50
Verifies the first Emergency number
50
<<1
st
Emergency
number>>#
Triple beep = rejected
Single beep = OK
51
Second phone number for “Push for help” or
“Emergency” button
51<<2
nd
Emergency number>>#
Up to 16 digits
=2-second pause
51
Verifies the second Emergency number
51
<<2
nd
Emergency
number>>#
Triple beep = rejected
Single beep = OK
52
Third phone number for “Push for help” or
“Emergency” button
52<<3
rd
Emergency number>>#
Up to 16 digits
=2-second pause
52
Verifies the third Emergency number
52
<<3
rd
Emergency
number>>#
Triple beep = rejected
Single beep = OK
53
First phone number for “Info” or “Call” button
53<<1
st
Information number>>#
Up to 16 digits
=2-second pause
53
Verifies the first Information/Call number
53
<<1
st
Information
number>>#
Triple beep = rejected
Single beep = OK
(Continued on next page)
