9
2014 Voxx Electronics Corporation. All rights reserved.
Check Vehicle Status
Press and release
2 times then press
within 3 seconds, the transmitter will
display the current status of the vehicle.
Display Illumination
Press and hold the
button for 1 second. The display will illuminate for 5 seconds.
Melody / Vibration Mode
To have the remote control vibrate, play a melody tone or both each time it receives a
response from the vehicle press and release then press and hold for 2
seconds.
Button Beeps
To toggle button beeps on or off press and release
then press and hold
for 2
seconds.
Battery Save Mode
While in POWER SAVE MODE the 2-way LCD transmitter will NOT look for any
incoming signals from the main unit until a button is pressed. The LCD screen will
display SAVE to indicate that power save mode is ON. To enter power save mode
press and hold for 5 seconds.
Clear Flashing Icons and Melody Sound
Press the
button 3 times within 3 seconds. This will clear the melody sound and
flashing icons on the LCD screen.
Button Lock
Press and release
then press hold the
for 2 seconds to toggle the button lock
on or off. When the button lock is active, the remote control will beep/vibrate 2 times
when a button is pressed indicating it is locked.
Illumination
Press and release
2 times then press and hold
for 2 seconds to toggle
illumination on or off. When on, the display will illuminate when it receives or sends a
command.
Additional 2-Way LCD Remote Control Functions
