12
Emergency Override Procedure
If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security
system off. There are two types of emergency override procedures. Check with your installing dealer to find out
what has been activated on your system.
Standard Emergency Override Procedure
1.
Enter the vehicle (the security system will trigger).
2.
Turn the ignition key to the ON position.
3.
Press and release the emergency override button (The security system will turn off).
Note: If the automatic arming feature is enabled on your system. The security system will re-arm the next time the
ignition key is turned off and the vehicle’s doors are closed.
Coded Override Procedure
The system has an optional override mode that allows you to program a 2-digit personal code using the
emergency override button offering a higher level of security. This feature must be enabled by your installing
dealer, the default override code is 11.
1.
Enter the vehicle (the security system will trigger).
2.
Turn the ignition switch to the ON position.
3.
Within 5 seconds press the emergency override button the number of times corresponding to
the first digit of your personal code (Default digit is 1).
4.
Within 5 seconds turn the ignition key OFF, then ON.
5.
Within 5 seconds press the emergency override button the number of times corresponding to
the second digit of your personal code (Default digit is 1).
6.
Within 5 seconds turn the ignition key OFF, then ON.
7.
If entered correctly the security system will turn off.
8.
Turn the ignition key to the OFF position.
Programming Your Personal Override Code
1.
Make sure the security system is disarmed.
2.
Turn the ignition key to the ON position.
3.
Within 10 seconds press and release the override button 3 times.
4.
Within 10 seconds turn the ignition key OFF then ON 3 times (The horn will honk and the lights
will flash 1 time).
5.
Within 10 seconds press and release the override button the number of times corresponding
with the first digit of your personal code (1-9).
6.
Within 10 seconds turn the ignition key OFF then ON.
7.
Within 10 seconds press and release the override button the number of times corresponding
with the second digit of you personal code (1-9).
8.
Within 5 seconds turn the ignition key OFF.
9.
You will notice the LED flash a number of times corresponding with the code you entered.
Note: If 15 seconds of inactivity passes the system will abort programming.
Note: Do not lose your “Personal Override Code”. Reprogramming a new code without the original code
can only be performed by an authorized dealer.
