128-
2 of 6
KEYLESS ENTRY
1. The LOCK icon button on the transmitter is used to lock the vehicle's doors, the UNLOCK
icon button is used to unlock the vehicle's doors. To lock or unlock the doors simply press
and release the desired function button one time. As a keyless entry unit, for your
convenience, the parking lights will flash twice when the doors are locked and once when
the door are unlocked.
.
REMOTE STARTING THE VEHICLE
The system will not start the vehicle if any one of the following situations exists;
The vehicle's hood is opened.
The gear shift selector is not in Park.
The brake pedal is depressed.
1. To start the vehicle, press and release the KEY icon button two times within 2 seconds (for
optional 1 BUTTON start press and hold the KEY icon for 3 seconds). The vehicle will
start and remain running for the pre-programmed 5, 10, 15, 20 minute run cycle. As a
visual indication, the parking lights will flash or remain on depending on the setting by
your installation center.
2. When you arrive at the vehicle, turn the ignition key to the ON position (not the spring
loaded start position), then step on the brake pedal to disengage the remote starter. The
vehicle will continue to run, but now on it's own power.
NOTE: The engine will stop running before the pre-programmed run cycle has expired if
you perform any one of the following functions:
-Press and release the KEY icon button on the transmitter two times within 2
seconds (for optional 1 BUTTON start press and hold the KEY icon for 3 seconds).
-Depress the brake pedal.
-Open the vehicle's hood
-Move the safety control switch to the Off position.
TURBO TIMER MODE (optional)
This system provides a means to cool down the vehicles turbo charger, if so equipped, by
allowing the vehicle to continue to run for a prescribed period of time every time the
vehicle's engine is turned off. This feature requires the system to be set up for turbo timer
during installation. Consult with your installation center to be certain this feature was acti-
vated and how long the vehicle will continue to run 3, 5, or 10 minutes after the ignition
switch is turned off.
To activate the turbo timer:
Anytime the engine is running for more than 15 seconds:
1) Place the gear selector in park.
2) Set the parking, (hand), brake.
3) Be certain your foot is off the brake pedal.
4) Press the program/Push-Button switch 2 times within 5 seconds.
The parking lights will flash two times indicating the mode was successfully entered.
If your parking lights flashed four times, this indicates the turbo mode was on and is now
turned off.
With the turbo timer mode selected on, after you've arrived at your destination, while the
engine is still running, set the parking brake, pause 2 seconds, then turn the ignition switch
to the off position. The engine will continue to run the allotted time according to the
Содержание CA-520A
Страница 5: ......
