Using Valet Mode
To engage valet mode:
1.
Turn the ignition key to the ON position.
2.
Press and release the emergency override button.
3.
The blue dashboard mounted LED will light solid indicating that the system is in
valet mode.
When valet mode is activated the dash mounted status LED will light solid, and all security functions will
be disabled.
To disengage valet Mode:
1.
Turn the ignition key to the ON position.
2.
Press and release the emergency override button.
3.
The blue dashboard mounted LED will turn off indicating that the system has
exited valet mode.
When the valet mode has been deactivated the dash mounted status LED will turn off and all security
functions will be enabled the next time the system is armed.
Additional LCD Remote Control Functions
Check Vehicle Status
Press the LOCK icon button, TRUNK icon button and OPTION button simultaneously for 1 second. The
LCD remote control will display the system’s current status.
Check Temperature
Press the TRUNK icon button and OPTION button simultaneously for 1 second. The LCD remote control
will display the vehicle’s interior temperature.
LCD Remote Control Display Illumination
Press and release the “F” button on the LCD remote control one time. The display will illuminate for 10
seconds.
LCD Remote Control Vibrate or Tones
Press an release the “F” button and the UNLOCK icon button on the LCD remote control simultaneously
one time to toggle between beep tones and vibrate mode. The LCD remote control will either beep or
vibrate to indicate which mode is selected.
Page Call Out
From within the vehicle, press and hold the emergency override button for 4 seconds, the LCD remote
control will emit a beep tone to indicate that someone is calling you to the vehicle.
Countdown Timer
The LCD remote control is equipped with a countdown timer for situations where an alert tone may be
needed to remind you of something important. The countdown timer allows you to set the timer up to 19
hours and 59 minutes. Refer to page 9 for programming.
Parking Meter Timer
The LCD remote control is equipped with a parking meter timer that allows you to set a countdown timer
for 10, 20, 30, 60, 90 or 120 minutes. The LCD remote control will emit a beep tone when the timer expires.
Refer to page 9 for programming.
Alarm Clock
The LCD remote control is equipped with a built in alarm clock that can be set to beep at a certain time
each day. The alarm clock must be set, and the feature turned on. Refer to page 9 for programming.
5
