manualshive.com logo in svg

Code Alarm CA-120, Руководство пользователя

Поделиться
Скачать
Code Alarm CA-120 Скачать руководство пользователя страница 2

128-6530

2 of 10

Page 2

Your System has many features and available options some of which are
selected at time of installation. Consult your installing dealer for options that
may have been installed and are not listed.

ARMING THE SYSTEM:

1. Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk.

2. Press and release the LOCK button of your key chain transmitter 1 time.

The parking lights will flash once, the siren will chirp once, and the dash
mounted LED will begin to flash slowly confirming the system is armed. If you
have the optional door lock/unlock circuit installed, the doors will lock.

NOTE: If the siren/horn sounds 3 chirps, then you have left a door, trunk, or
hood lid ajar. Simply close the opened entry point to provide full protection.

If the siren "chirped" 3 times, sometime after arming, the delayed dome light
learn circuit has been programmed and the system detected a open entry
point after the learned delay expired.  Again, closing the hood, trunk, or doors
will correct the problem and you do not need to disarm the system to make
the correction.  If the siren/horn did not sound when arming, then the chirps
have been turned OFFand you should refer to the section titled "ELIMINATING
THE ARM/DISARM CHIRPS" in this manual.

SILENT ARMING:

1. Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk.

2. Press and release the ARM and DiSARM buttons of your keychain
transmitter simultaneously.

The parking lights will flash once, and the dash mounted LED will begin to
flash slowly confirming the system is armed. The siren will not chirp. If you
have the optional door lock/unlock circuit installed, the doors will lock.

NOTE: If the siren/horn sounds 3 chirps, then you have left a door, trunk, or
hood lid ajar. Simply close the opened entry point to provide full protection.  If
the siren "chirped" 3 times, sometime after arming, the exclusive delayed
dome light learn circuit has been programmed and the system detected a
open entry point after the learned delay expired.  Again, closing the hood,
trunk, or doors will correct the problem and you do not need to disarm the
system to make the correction.  If the siren/horn did not sound when arming,
then the chirps have been turned off and you should refer to the section titled
"ELIMINATING THE ARM/DISARM CHIRPS" in this manual.

Содержание CA-120












Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды