920-0661-00 Rev. C
Page 1 of 8
Installation and Operation Instructions
Installation and Operation Instructions
M180L/M180LMC
WARNING LIGHT
1.
Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are
essential to ensure the safety of you and those you are seeking to protect.
2.
Exercise caution when working with live electrical connections.
3.
This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4.
Proper placement and installation are vital to the performance of this warning device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that s/he
can operate the system without losing eye contact with the roadway.
5.
Do not install this product or route any wires in the deployment area of an air bag. Equipment mounted or located in an air
bag deployment area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal
injury or death. Refer to the vehicle owner’s manual for the air bag deployment area. It is the responsibility of the user/
operator to determine a suitable mounting location ensuring the safety of all passengers inside the vehicle particularly
avoiding areas of potential head impact.
6.
It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use,
the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open
trunks or compartment doors), people, vehicles or other obstructions.
7.
The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an inter-
section, driving against traffic, responding at a high rate of speed, or walking on or around traffic lanes.
8.
This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying
all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal laws and
regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
Do not install and/or operate this safety product unless you have read and understand the safety informa-
tion contained in this manual.
WARNING!
Failure to install or use this product according to manufacturers recommendations may result in property
damage, serious injury, and/or death to those you are seeking to protect!
M180SL& M180LMC directional LEDs are bright and versatile 180
degree warning light and work light that are suited to a wide variety
of applications. Their triple stack design offers approximately 3
times the light output of the popular M180S series. Their
low profile design coupled with multiple mounting options
(surface, edge, self-adhesive and permanent) and 30
degrees of adjustable pivoting, provide superior flexibiltiy
when positioning the lights for optimum warning capability.
Both models offer multiple flash patterns and multiple units
can be synchronized to operate either simultaneously or
alternately with each other.
Available in solid colors: M180L-X (A,B,R,W)
dual colors: M180LMC-XX (BA, RA, AW, BW, RW, RB)
Distributed By:
