Codan Envoy 2220, Руководство по началу работы

Страница: 32 / 115

U
SING THE WIZARD
U
SING THE WIZARD
22 E
NVOY
™ T
RANSCEIVER
G
ETTING
S
TARTED
G
UIDE
Adding a Phone call
To continue with adding a Phone call:
1
Press to move to the Phone Number entry.
1
Enter the phone number.
1
Continue from Completing the contact on page 22 .
Adding a Get Status call
To continue with adding a Get Status call:
1
Press to move to the
Selcall
|
ALE Address
entry.
1
Enter the address of the station that you want to call.
1
Press to move to the
Status Type
entry, then press .
1
Press or to scroll to the status type that you want to
use, then press OK .
1
If you selected
?: Other
as the status type, enter the
text/command that you want to send, press
(
Options
), scroll to
Save
, then press (
Select
).
1
Continue from Completing the contact on page 22 .
Completing the contact
To finish entering the information required for the contact:
1
Press to move to the
Call Description
entry.
By default, the call type is entered as the call description.
1
Enter the description that you want to use for this call.
1
Press ( Save ) to save the information.
1
If you want to add another call for the contact, press
(
Yes
), then repeat the steps for adding a call.
If you do not want to add another call, press ( No ).