Coda Audio DNC260
User Guide version 0.1
Page 11 of 30
Edit Select Buttons
The currently selected edit parameter page is displayed on the bottom left corner of the
LCD. Pressing the edit select buttons moves through the available parameters for the
current input or output.
Text Display
Preset, channel, parameter and status information is shown on the 2x 24-character text
display. In most screens the currently selected channel is displayed on the upper line and
the edit parameter on the lower line. To simplify the display and enhance security, some
parameters or parameter pages are omitted when not relevant.
Parameter Knobs
Three velocity sensitive parameter knobs are used to adjust parameters shown on the
display. Up to three parameters at a time are displayed on the screen. The parameter name
is shown above the parameter value in each of the three screen sections. The parameter
knobs have a fixed association with the screen sections; the rightmost parameter knob
adjusts the rightmost parameter and so on.
Output Signal / Limiter Indication
Two LEDs are provided for each output channel. These show the signal level relative to the
limiter threshold. The yellow LED will light when the signal is 6dB below the threshold and
the red warning LED will light when the limiter threshold is reached.
Mute Buttons and Status LEDs
Each output has a mute button and associated mute status LED. Pressing the button
toggles the mute on and off.
Note that the mute buttons do not function when the Secure mode is activated.
Secure Button (on the rear)
A momentary button is fitted behind the rear panel, between the output XLRs and the
RS232 port. When activated, this will disable all the front panel controls so they cannot
affect the signal path, making the unit secure against tampering. When in
secure mode,
the indicators still operate normally. Note that the communications port is still active in
secure mode.
