Englis
h
8
max.
3.4 Continuous measurement
The distance meter has three measuring references. The last
measuring reference used will also be pre-selected measuring
reference the next time it is used.
Press
until the measuring reference you desire appears in the upper left hand corner of the display.
Measuring from the front of
the distance meter.
Measuring from the back of
the distance meter.
Measuring from the tripod
mount.
3.6 Choosing measuring units
Long press
until the desired measuring unit is shown in the lower right hand corner.
Available measuring units:
metres
feet
inches (x, x)
0
′
0
″
1/32
inches (x/x)
Length
m
ft
in
0
′
0
″
1/32
in
Area
m²
ft²
ft²
ft²
ft²
²
Volume
m³
ft³
ft³
ft³
ft³
m³
Note:
The same measure reference will be pre-selected the next time it is used.
1. Long press
for about three seconds.
The laser beam will be automatically activated.
2. Press
if you want to pause during measuring.
Press
to continue measuring.
3. During measuring both the min and max values will be displayed.
4. To finish measuring, first press
to pause and then to finish.
3.5 Changing measuring reference