Figure 16
Figure 17
11. INSTALLING THE
LIGHT BULBS AND
GLASS SHADE
NOTE:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
1. Install a 13 watt (max.) fluorescent lamps
(included) for each socket. (Fig. 16)
2. Mount the glass shade to the light fixture by
partially unscrewing the thumbscrews, inserting
the glass shade, and then gently tightening the
thumbscrews until the glass shade is secure. Do
not over tighten. (Fig. 16)
3. Restore power and your light kit is ready for
operation.
8
Glass
shade
Bulbs
Thumb screws
Screws
Switch
housing
Switch
housing
cover
Plastic plug
12. INSTALLING THE FAN
WITHOUT THE LIGHT
KIT
(OPTIONAL)
1. Disassemble the switch housing cover from
the light kit. You can keep the light kit for future
use. (Fig. 17)
2. Attach the plastic plug to the switch housing
cover.
3. Install the switch housing cover to the
switch housing with light kit mounting screws
provided.
