Installation of lights and electrical work may present a possible shock or fire hazard if improperly installed or used.
All
electrical work should be performed in accordance with all federal, state and local safety regulations and require proper
grounding.
All work should be performed by a certified electrician. Before starting installation, turn OFF electricity at the
main fuse or circuit breaker that controls the power to the fixture/room you are working on.
WARNING
NEWCASTLE FLOOD LIGHT
WALL
INST
ALLA
TION INSTRUCTIONS
cocoweb.com
Note
The information in this document is subject to change without notice.
COPYRIGHT
©
COCOWEB.COM 2017
COCOWEB.COM
13715 Alton Pkwy
Irvine, CA 92618
Phone: 1-888-783-0378
INSTALLATION GUIDE
1. Connect the shade with the stand by screwing it clockwise.
2. Continue on with screwing the rest of the stand together.
There should be two other pieces to attach minus the base.
3. Place the wire attached to the shade into the stand to hide it
and collect the wire through the opening towards the bottom.
4. Place in the light bulb by opening the cage of the shade by the
unclasping the clasp on the underside of the shade.
5. Attach the base by locating the smalled end pieces to join the BLANK
6. Connect the plug wire to the lighting wire then plug into the wall.
9.2
17.5
2
43.3
16.1
16.1
