1300 663 907
Model Number
HE160972
After Sales Support
11
2.4 Installing the Landing Skids
a.
Insert the Landing Skids in to the bottom of the Quadcopter as shown
b.
Secure the Landing Skids with the included screws
2.5 Installing the Propeller Guards
a.
Remove the Propeller Guard covers on all 4 sides of the Sky Scanner
b.
Push the Propeller Guard into the slot until you hear a ‘click’
c.
Secure the Propeller Guard with the included screws
2.6 Installing the Camera
a.
Insert the Micro SD card into the camera
b.
Insert the camera onto the base of the Quadcopter until it ‘clicks’ into place
c.
Connect the camera cord to the ‘PLUG’ jack
2.7 Inserting the Rechargeable Battery into the Sky Scanner
a.
Open the battery cover on the Sky Scanner and locate the red connector. You
may need to gently pull the wire out if it is not immediately visible
b.
Join the rechargeable battery connector to the Sky Scanner connector
c.
Gently place the battery and wiring back inside the Sky Scanner and close the
cover
a
b
a
a
c
c
b
b
