Cocoon Skyview HE170642, Инструкция по эксплуатации

Страница: 13 / 24

13
1300 663 907 Model Number HE170642 customercare@winplus.com.au
After Sales Support
2.7 Installing & Replacing the Propellers
Each propeller is marked with an arrow indicating the turning direction during flight.
Each arm of the Skyview HD Quadcopter has a corresponding direction as indicated
in the image. Always ensure the arrow direction on the propeller
matches the direction on the arm, otherwise the quadcopter will
not fly correctly.
To replace Propellers:
a.
Pull off the silver caps
b.
Using the included screwdriver, unscrew the plastic spacer
as shown and remove
c.
Remove the washer and damaged propeller
d.
Replace the washer and propeller taking note the arrow
on the propeller matches the direction of the arrow on the
arm
e.
Take note of the hole position on the pin and replace the
spacer and screw into place
f.
Replace the silver cap
g.
Repeat steps
a-f
as necessary for the remaining blades
OPERATION
3.1 Pairing the Skyview HD Quadcopter to the
Remote Control
a.
Turn the Skyview HD Quadcopter power switch to ON
and place on a flat surface. The LEDs will flash to indicate
the Skyview is in pairing mode
b.
Press the power button on the remote control and you will
hear a beep. The remote control will automatically pair
with the Skyview and beep again. Once the LEDs on
the Skyview are solid, the remote control has successfully
paired. If it does not pair, turn the remote off and then on
again
3.2 Unlocking Flight Controls
a.
To unlock flight controls, push both the left and right
throttles down and away from each other as shown in the
image