12
After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
8.
INTERCOM FUNCTIONS
The intercom, call transfer and conference functions can only be used when there are 2 or more
handsets registered to the same base station. See page 16 for deatils.
Note: If you try to make a call while another handset is already on an external call, you’ll hear
a busy tone for a few seconds before the display returns to idle.
A.
Intercom Another Handset
1. Press the Int button
2. The intercom will immediately start if there are only 2 handsets registered.
3. If there are more than 2 registered handsets, the handset numbers which are
available for intercom, and a *, will be displayed. Press the specific handset
number you wish to call, or press * to ring all handsets, to start intercom.
B.
Transfer a Call to another Handset
1. During the call, press Int button
to put the external call on hold
(the caller can no longer hear you).
2. The intercom will immediately start if there are only 2 handsets registered.
3. If there are more than 2 registered handsets, the handset numbers which are
available for intercom, and a *, will be displayed. Press the specific handset
number you wish to call, or press * to ring all handsets, to start intercom.
4. Press Talk button
on the called handset to answer the internal call, both
handsets will be connected to the call.
5. Press Hang Up/Exit button on the first handset to transfer the external call to
the called handset.
Note: If there is no answer from the called handset, press the Int key to resume the external
call.
C.
Answer an External Call During Intercom
1. During intercom, a new call tone is emitted when there is an incoming external call.
2. Press Talk button
to answer the external call and end the intercom.
3. To put the internal call on hold and answer the incoming external call, press Int key
D.
Switching Between and External Call and an Intercom Call
1. Press the Int button to switch between an intercom call and external call.
Establish a three-party conference call
The conference call feature allows one external call to be shared with two
handsets (in intercom). The three parties can share the conversation and no
additional network subscription is required.
2. During an external call, press Int button
to put the external call on hold
(the caller can no longer hear you).
3. If there are more than 2 registered handsets, the handset numbers which are
available for intercom will be displayed. Press the specific handset number you
wish to call to start intercom.
4. Press Talk button
on the called handset to answer the internal call, where
both internal callers can talk. Intercom is established.
5. Press and hold Int button for 2 seconds on the first handset to start the three-
party conference. Conference will be displayed on the screen once the conference
call is established.
Instructions
