18
4.
A filter can be applied via the drop down menu if a certain type of data
is required
5.
When you hit “search” the web tool will return every GPS point reported
within the specified time frame
6.
From the “Reports” dialogue box you can choose to export the data to
an .xls format by clicking “Export Excel” at the bottom of the report
Using Latitude and Longitude Values on the Map
You can manual input any latitude and longitude values on the map navigate to that
given area.
1.
Select “Map” from the left side menu to expand the Map menu
2.
Enter a pair of Latitude and Longitude coordinates
3.
Click the “Locate” button
4.
This will put a red pin on that location and zoom to it using the map
Ruler
Utilising the map you can measure between any points selected.
1.
Select “Ruler” from the left side menu to select the ruler tool
2.
While the mouse is over the map, left click to set the start point of
the measurement
3.
Click the left mouse button again to add another point of measurement
4.
Right click to set the end point
5.
When set the total length between the two or more points is displayed
in kilometres
Chart
1.
Select “Chart” from the left side menu to open the Chart screen
2.
Select the Chart Type and time interval from the drop down menus
3.
Set the start and end dates
Note: The chart period must be more than two and less than twelve days
4.
Click “OK” to generate the chart for the period selected
Содержание GT42395
Страница 27: ...27 Notes ...
Страница 28: ...28 ...