MICROPHONE
Turning On/Off
The PA & DJ Speaker System can be powered when connected to mains power or using the
internal 12V battery.
1.
Connect the supplied power cable to the rear of the unit.
2.
Connect the other end of the power cable to mains power.
3.
Turn on the switch at the mains power point.
4.
The unit will automatically power on when connected to mains power.
Note:
If you wish to power the unit using the internal battery, simply turn the Battery switch
located on the rear of the unit to ON.
Charging
Before using the PA & DJ System for the first time, charge the unit for at least 8 hours.
1.
Connect the supplied power cable to the rear of the unit.
2.
Connect the other end to mains power.
3.
Turn on the switch at the mains power point.
4.
Turn the Battery switch on the rear of the unit to ON
Note:
The PA & DJ Speaker System will only charge when the battery switch is in the ON position
and while connected to mains power. The unit will remain on while it is being charged and can
still be used during this time.
Using the Wireless Microphone
The PA & DJ Speaker System comes with a wireless microphone to get you started straight out of
the box.
1.
Turn on the PA & DJ Speaker System.
2.
Unscrew the bottom of the microphone to access the battery enclosure. Insert
the supplied 2 x AA batteries into the microphone. Take note of the battery
polarity when inserting batteries.
3.
Replace the bottom microphone cover.
4.
Turn on the wireless microphone by turning the switch to ON.
5.
The wireless microphone will flash once and automatically pair to the PA & DJ
System and is ready to use. If it does not flash, check you have inserted the
batteries correctly or replace the batteries.
6.
Adjust the volume of the microphone by turning the MIC VOL knob located
on the front control panel.
Instructions
4
After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
Содержание AS43515
Страница 16: ......
