background image

 

AEX-701 SIGNAL AMPLIFIER 

Remarks 

 

  

Reminders 

  This product is a so-called ‘repeater’ and is intended to repeat the wireless signal from your COCO 

transmitter (e.g. remote control). This allows you to control a receiver that would otherwise be outside 

the wireless range of the transmitter. 

  This product must be used in combination with at least one COCO transmitter and one COCO receiver 

that have already been configured correctly. 

  This product can only be used with on/off receivers! Do not use dimmer receivers! 

  The wireless system can be indefinitely expanded with other COCO transmitters and/or receivers. 

  Use only one AEX-701 in the same area. 

  This product contains memory and can operate with a maximum of 6 different transmitter codes. 

  Removal of one transmitter code from the memory of the AEX-701: (1) Briefly press the ‘Learn’ button. 

(2) Send an ‘off’ signal with the transmitter that you want to remove from the memory (in the case of a 

doorbell, press the doorbell button). (3) The indicator of the AEX-701 flashes twice to confirm. 

  Removal of all the transmitter codes from the memory of the AEX-701: (1) Press ‘Learn’ for 6 seconds. 

(2) The indicator begins flashing quickly. (3) Briefly press the ‘Learn’ button again. 

  This product is waterproof (IP56). To keep the product waterproof, make sure not to damage the rubber 

seal on the inside (under the battery cover). 

  If the product does not work or does not work properly: 

- Check the correct placement and/or operation of the batteries. 

- Check step by step whether the concerned transmitter(s) and receiver(s) are configured properly. 

- Make sure the AEX-701 is within the wireless range of the transmitter (max. approx. 30 metres). 

- Make sure the receiver is within the wireless range of the AEX-701 (max. approx. 30 metres). 

 

  

Safety instructions 

  Never use COCO products for life support systems or other applications in which equipment 

malfunctions can have life-threatening consequences. 

  Do not attempt to repair this product. If the product is damaged or if you are in doubt about the proper 

operation, take the product back to the place of purchase. 

Содержание AEX-701












Отзывы: