Cocktail Audio Pro X100, Руководство пользователя

Страница: 9 / 40

Cocktail Audio Pro X100 www.cocktailaudio.co.uk
5
3. Hard drive (HDD) installation/setup:
The HDD would be installed prior to receiving the X100.
A software based device means the operating system would be managed on the HDD.
Therefore the X100 would be properly managed without the need to constantly
upgrade to a newer hardware.
The X100 supports regular 3.5”, 2.5”, SSDs & Hybrids – Max 8TB.
4. Installation & connections:
Connect the adaptor and cable into the back of the device and turn ON the power.

Toslink/SPDIF (Digital Out: DACs, Amps etc)

HDMI (Terminal Setup, Audio Output – Disabled )

USB (Digital Out: DACs, Amps, etc)

Jack (AUX/Active Speakers)

MIC (Disabled)

Ethernet Port (Bridges, UTP/CAT Cables)
5. Controlling the Cocktail Audio Pro X100
The Cocktail Audio Pro X100 is designed to be controlled through a web interface or
any compatible App controller via a tablet, notebook, computers and smart phones
(cross platform).
6. Initial setup
Turn ON the Cocktail Audio Pro X100 by pressing the power button on the front
panel. It will take around 30-60 seconds for the X100 to initialise.
To manually turn OFF the X100, just press the frontal button - it takes about 10
seconds for the X100 to turn OFF completely.
To force a shut down, press and hold the frontal button for 5-10 seconds.
This is useful when the system is not reacting.
NB : The web interface could also be used to reboot or shutdown the X100.
a.
To accessing the web interface enter ‘
www.mycocktailaudio.co.uk
’ or the IP
address of the Cocktail Audio Pro X100.