4
9. Name the device (e.g. Water
Heater) and select the room
(e.g. Bathroom) for the ON/OFF
Thermostat module. When you
are done, click “Finish” button.
10. You will be directed to the
screen with the list of all added
devices, where the newly
added ON/OFF Thermostat
module should be listed.
11. Press the arrow button to
proceed.
11
13. To locate newly added device,
click “Devices” tab at the
bottom of the screen.
14. If device is not shown on the
list, choose the proper room by
pressing „Device by location”
button.
13
14
12. The procedure of adding the
ON/OFF Thermostat module
has been completed. You will
be redirected to the “Home
Setup” screen.
9
