1
Technical specification
3-in-1 Sensor
Type:
Ordering code:
3-IN-1 Sensor
CKNPED1
Date:
04.03.2018
Document:
Cockpit SL_3-in-1_MultiSensor_user manual_eng_V.1B
The purpose of 3-in-1 Sensor is to detect the motion of a person and monitor the current
illumination and temperature. It is for indoor use only.
The 3-in-1 Sensor is a battery powered all-in-one motion sensor, temperature sensor,
and lighting sensor. When the sensor detects motion in front of
its viewing window, it will send wireless signal to the network. The sensor can report
current temperature, and lighting levels in the immediate vicinity.
It is the Z-Wave plus product and it supports the security, OTA. Those are newest
features of the Z-Wave technology.
Add/Remove from Z-Wave
TM
Network
There are two tamper keys in the device, one is in the back side and another is in the
front side. Both of them can add, remove, reset or association from Z-Wave
TM
network.
In the first time, add the device into the Z-Wave
TM
network. First, make sure the
controller is in the add mode. And then power on the device, just take out the insulation
Mylar in the back side of the device. The device will auto start the NWI (Network Wide
Inclusion) mode. It should be included in 5 seconds. You will see the LED light ON one
second.
Notice
: Including a node ID allocated by Z-Wave
TM
controller means “
Add
” or
“
Inclusion
”. Excluding a node ID allocated by Z-Wave
TM
controller, means “
Remove
”
or “
Exclusion
”.
