• STEP 1: The most important thing — ALWAYS POWER OFF and UNPLUG the Power
Base from the power supply outlet when it is left unattended, before assembling, disassembling,
changing accessories or approaching parts that move in use or when cleaning.
Do not attempt to handle the appliance until all parts have stopped moving!
• STEP 2: Make sure the Bottle/ Extractor Blade is not attached to the Power Base.
• STEP 3: Cleaning the individual components (Power Base, Extractor Blades, Sport Bottle) as follows:
HERE'S HOW TO CLEAN THE GOPOWER ELITE:
• DO NOT REMOVE THE GASKET as this will permanently damage the Extractor Blade and cause leakage.
If after washing as indicated above additional disinfecting is desired, you may rinse with a 10% vinegar/water solution
or with lemon juice. If, over time, the gasket becomes loose or damaged, you may order a new Extractor
Blade at
www.cocinare.com
or contact Customer Service at
• Dry the Extractor Blade completely. It is helpful to turn the blade on its side in your
dish drainer to ensure BOTH SIDES of the Extractor Blade are completely dried.
EXTRACTOR BLADES:
• The cup and lids are all TOP RACK dishwasher safe. We recommend rinsing them and
giving them a quick brush with a dish brush to remove any dried debris before washing them in
the dishwasher. NEVER use the sanitize cycle to wash the Bottle as this may warp the plastic.
• Regularly check the 3 tabs on the side of the Bottle (cracking, crazing,
breakage or rounding). If damaged, replace immediately to prevent possible personal injury.
• NEVER USE A BOTTLE WITH A BROKEN TAB AS DOING SO MAY CAUSE THE CUP AND
POWER BASE TO SEPARATE EXPOSING THE BLADE ASSEMBLY!
GOPOWER ELITE SPORT BOTTLE, LIDS :
For the most part, the Power Base doesn't really get dirty, but if you neglect to twist the
Extractor Blade on to the Bottle tightly, liquids can leak out and get into the base and stick to the activator buttons.
• Do not remove the rubber or plastic liners inside the Power Base.
• Use a sponge or dish cloth dampened with warm soapy water to wipe down the inside and outside of the Power Base until clean.
• Pay particular attention to the Actuator Tabs on the inside of the Power Base to loosen any sticky debris from drips and
spills. If necessary, you may use a small brush to scrub the area to ensure it is kept clean.
POWER BASE:
19
20
