6.3.1
Seat angle adjust: Refer to (fig.25) to adjust the seat to one of the recline posi ons
(posi on 1,2,3).
6.3.2
Seat installa on: Place the child seat in the forward facing posi on in the vehicle. Ensure
the bo om of the child seat is against vehicle seat surface, and the front of the child seat
touches the vehicle seat backrest. The child seat base should not be suspended (fig.26).
6.3.2.1.
Extend the vehicle 3 point belt to the maximum(fig. 27). Insert it from the slot at the
side of the seat, (fig. 28) then through to the other side (fig. 29).
6.3.2.2.
Insert the buckle tongue into the vehicle buckle and you should hear an audible
"Click" (fig. 30). Then put the lap strap of the 3 point vehicle belt into the slot that is between
the seat body and seat base (fig31). The lap strap must be in place (fig.32).
6.3.2.3.
Repeat the same steps on the other side (fig.33). Pull the diagonal belt at the side of
the vehicle buckle, to ensure that the belt is ght,(fig34). Then pull the diagonal belt at the
top of the seat as indicated by the arrow, as ght as you can (fig.35).
6. 4 Installa on for Group 1 (op on 3): Forward facing installa on in
vehicle with ISOFIX and top tether.
IMPORTANT - DO NOT USE FORWARD FACING BEFORE THE CHILD'S WEIGHT
EXCEEDS 9KG.
6.4.1. ISOFIX installa on
6.4.1.1
First put both guides (part no.23) onto the ISOFIX anchor fi ngs between the seat and
backrest of the vehicle seat (Fig. 36).
6 .4.1.2
Using one hand grab the ISOFIX control handle (part no.16) at the lower part of the
base, and pull outward (Fig.37). The ISOFIX connectors (part no.23) will now automa cally
extend from the back of the seat base (part no.24).
Test whether the connector hooks are opened by pushing the ISOFIX unlock bu on (part
no.07) forward (Fig. 38).
When the ISOFIX unlock bu on indicates "RED", the connector hooks are open.
6.4.1.3
Then place the seat on the vehicle seat and push both ISOFIX connectors (part no.23)
onto the metal brackets (ISOFIX anchor points) and press firmly against it so that the
connectors (part no.23) lock in place (Fig. 39).
The correct locking will be confirmed when indicatorvchanges to "GREEN" this shows on the
ISOFIX unlock bu on (part no.07) on both sides (Fig 40).
Test whether the ISOFIX connectors (part no.25) are closed by moving the seat shell (part
no.31) and checking if the are lockedwell in place.
Содержание Cressida
