COC
A-COLA FREESTYLE DISPENSER CREW GUIDE
DAILY TASkS
|
ChANGE A CARTRIDGE
(continued)
12
8
Remove cap from
new cartridge.
9
Remove paper seal from
the new cartridge by
grabbing the tab and
peeling back.
11
Close the slot door to push the cartridge
in the rest of the way. The light on the slot
will turn solid green if installed correctly.
12
If more cartridges need to be
replaced, scan the next cartridge
over the RFID reader. The slot for the
scanned cartridge will blink.
13
If the contents of a cartridge
get on your hands, wash them
right away to prevent staining.
If the contents of a cartridge
spill on the floor or inside of the
Coca-Cola Freestyle dispenser,
clean the areas right away.
10
Insert cartridge in the slot with the RFID tag
facing in
.
The label on the side of the cartridge should be
facing up
. Gently push the cartridge until the slot
door is engaged.
CAUTION:
If the light does not turn solid green, refer
to page 24 in the “Troubleshooting”
section for additional information.
Cartridge installed
correctly.
Solid Green
Empty cartridges.
Choose a cartridge
to replace and scan
a new cartridge.
Solid Red
Find the slot
and change
cartridges.
Flashing Red
Scan
Close the lower door when finished.
Cartridge Back
Cartridge Front
RFID Tag
CAUTION:
Do not force or push
the cartridge once the
slot door is engaged.
