Page
Coby Electronics Corporation
Turn off all devices before making system connec-
tions. Do not connect the power until all connections
have been made.
Antenna Input
Use this connection if you are using an indoor or outdoor antenna
to receive television signals.
1
Antenna Line
Connect the antenna line (75Ω coaxial cable) to the TV
Antenna In jack located on the rear of the unit.
To view an analog antenna signal (NTSC):
Set the Antenna option to “Air” TV setup menu.
Set the unit to TV mode (the screen will display the current
channel number).
NTSC television broadcasts will cease in the USA on
February 17, 2009. To receive over-the-air television
broadcasts after this date, use the digital ATSC tuner
(DTV mode).
1.
1.
2.
Cable Connections
