7
When you turn on the unit, it will be set to the last channel watched before the unit was turned off.
Example:
If Channel 66 was the last channel watched before the unit was turned off, Channel 66 would
be the channel displayed when the TV is turned back on.
Menu Control
Press the Menu button on the unit (or the TV Menu key on the remote control). This will display the TV
menu on screen.
A pair of red arrows to the left of a menu item indicates the current selection. Press the CH+/CH– keys to
scroll through the items up and down. Press the V+/V– keys to enter the selected item’s submenu. When
you have selected an item that has modifiable values, press the V+/V– keys to change its settings.
Press the Menu key to send the selection back one menu level.
PICTURE
SYSTEM
(“System” has been selected in this example)
TIMER
PRESET
EXTRA
TV/CATV Selection
TV mode is used to receive local over-the-air (OTA) TV signals. Attach a rod antenna to the External
Antenna jack on the rear of the unit to receive TV signals. Adjust the angle of the rod antenna to gain
better reception.
CATV mode is used to receive cable TV signals. Attach a CATV cable to the External Antenna jack on
the rear of the unit to receive cable TV signals.
To set the unit to TV or CATV mode:
1. Press the Menu button on the unit (or the TV Menu key on the remote control). This will display the
TV menu on screen.
2. Highlight the item PRESET (press the CH+ or CH– key to change which item is highlighted).
3. Press the Volume Up (V+) key to enter the PRESET submenu.
4. Highlight the item AREA (press the CH+ or CH– key to change which item is highlighted).
5. Press the Volume Up (V+) key to change between TV mode and CATV mode.
6. Press the Menu button twice to exit the TV menu.
TV/DVD/AV Mode Selection
TV mode is used to watch television.
DVD mode is used to watch DVDs with the built-in DVD player. See the DVD Operation section for more
information.
AV Mode is used to watch video from an external source (e.g., VCRs, camcorders, portable media
players, etc). You can also watch SECAM/PAL/NTSC356/NTSC443 multi-system programs in AV mode.
Note:
External sources should be connected to the Line In jacks located on the front of the unit.
