COBY ELECTRONICS CORP.(”COBY”) warrants this product to the
original purchaser to be free from defects in material or workmanship
under normal use for 90 DAYS from the date of original purchase.
COBY agrees under this warranty, torepair or replace it with a new or
reconditioned product at no additional charge. Our warranty does not
cover any product which has been subject to neglect, unreasonable
use, accident, violation of operating instruction or any product that has
been repaired or modified by an unauthorized service agent. To obtain
factory service, return this unit freight-prepaid to the address shown
below within the duration of this warranty. Enclose $6.00 for each item
in the form of money order made payable to COBY ELECTRONICS
CORP. to cover the cost of shipping and handing. Also, include a copy
of the sales receipt to show proof of purchase and a detailed description
of the problem. The unit(s) must be packaged in such a way as to rea-
sonably protect it frompossible shipping damage. For further information
write to.
COBY’S liability under any legal theory for any loss damage in any way
related to this product shall not exceed the sales price of this product.
In no event shall COBY be liable for any incidental or consequential
damages resulting from the use of this product, or inability to use this
product. Repair or replacement as provided under this warranty is the
exclusive right of the consumer.
Except to the extent prohibited by law, no express or implied warranty
of merchant ability or fitness for a particular purpose on this product
shall be extended beyond the period of this warranty. Some States
prohibit the exclusion or limitation of incidental or consequential
damages, so that the above limitation or exclusion may not apply
to you. This warranty gives you specific rights, and you may also
have other rights which may vary from State to State.
90 DAYS LIMITED WARRANTY
COBY ELECTRONICS CORP.
Customer Service Dept.
56-65 Rust Street
Maspeth, N.Y. 11378
TO CLEAR THE PROGRAMMING, Press STOP( ) button.
(3)
(1)" "is displayed when the battery voltage reaches low.
(2)When the voltage is too low, the unit will automatically turn off.
Accessories Included
………..
Professional High Performance
UL Approved AC/DC Adapter
Digital Neck Band Headphones
(Batteries not Included)
MP3/CD Play Section
Frequency Response..............................20 ~ 20,000Hz
Wow and Flutter......................................Below Measurable Limits
Sampling Rate.........................................8 times over sampling
D/A Converter..........................................1-Bit
General
Maximum Output (Stereo Headphone)… 20mW+20mW(32ohm)
Power Supply
AC Adapter....................................…120V 60Hz
DC......................................................4.5V with DC Adapter
3V with 2 size “AA” Batteries
Dimension
................................
3"x 4.2"x 1.2"
Weight
.................................
0.33lbs (Main Unit Only)
SPECIFICATION
RAND
Press PLAY/PAUSE( ) button to start INTRO play from track
No.1
(2)
Press FF button to start INTRO play from next tracks in
random order.
(3)
Press REW button to start INTRO play from current or
previous track.
(4)
RANDOM PLAY
Press MODE button five times at STOP mode and "RAND" is
displayed and flash.
(1)
TO PROGRAM
(1)
PROGRAM PLAY
Press PROG button at stop mode and
"PROG" display and "00" will flash.
(a)
Press FF (or REW ) button to select the track number.
(b)
TO COMPLETE THE PROGRAMMING AND TO PLAY
(2)
Press PLAY/PAUSE( ) button to start the programmed tracks.
PROG
(2)
(1)
REPEAT PLAY
Press MODE button twice to repeat album tracks.
Press MODE button once to repeat one track.
(3)Press MODE button three times to repeat all tracks.
ALBUM
(2
) Press FILE SEARCH button twice to enter folder
search mode.
On folder search mode, you can check the directory
by pressing UP( ) or DOWN( ) key.
When the desired directory shows, press FORWARD( ) or
BACKWARD( ) button to enter its subdirectory.
press UP or DOWN to choose desired song and press
ENTER button to confirm and play.
MOVE TO THE DESIRED SPOT
(1)During play, press and hold FF (or REW ) button
continuously to fast forward (or fast reverse) the current
track.
(3) During pause mode, press FF (or REW ) button to
play the next track (or previous track). The unit will start
play desired track.
FILE SEARCH ON MP3 MODE
If the selection is correct, press MODE button again to confirm,
Press ENTER button start to play.
LCD indicate the song name, if same first letter with more
than one song, press UP or DOWN to select desired
song and press ENTER button to confirm. MP3 player start
to play the song.
Press the key once to enter file search mode.
(2)During play, press REW button to play previous track.
(1)
Press FILE SEARCH key to enter selection mode.
To delete a letter, press MODE button once, there is a" "
Press FORWARD( ) or BACKWARD( ) button to select the
desired letter. Press UP( ) or DOWN( ) button to select
page up or page down.
After selected the right letter,press ENTER button to
confirm the selection.
LISTEN TO DESIRED TRACK
Press FF (or REW ) button to set the desired
track#, press PLAY/PAUSE ( )button to play. Press
FF (or REW ) button to change the track# during
the play mode.
(1)
STOP
Press STOP ( )button to stop play.
PAUSE
Press PLAY/PAUSE( ) button to pause on/off alternately,
time will flash at pause mode.
When MP3/CD track data has been read,
Unit will start play from track No.1 automatically.
LCD screen will display the track and the play
time, song info will move from right to left.
(3)
LCD screen will display the last
track number.
Press FF button
TO CLEAR THE PROGRAMMING, Press STOP( ) button.
AUTO PLAY
LCD screen will display "NO DISC", if CD is not in the
unit.
Make sure to use mp3 file extension only when burning CDs.
Do not mix audio files and mp3 files within a CD ROM.
SKIP
(3)
Press ESP button to prevent disruption
or stopping of CD player. LCD will display
"ESP" at anti-shock mode.
POWER ON
Press PLAY/PAUSE ( )button to turn the power on.
(1)
(2)
MP3 MODE
IMPORTANT MP3 CD making tips.
(1)" "is displayed when the battery voltage reaches low.
(2)When the voltage is too low, the unit will automatically turn off.
Press MODE button four times at STOP mode and "RAND" is
displayed and flash.
(1)
RANDOM PLAY
Or
TO PROGRAM
PROGRAM PLAY
Press PROG button at stop mode and "PROG" and "00" will
display.
Press FF (or REW ) button to select the track number.
(b)
Press PLAY/PAUSE FF and REW button to play
tracks in random order.
(2)
Select RANDOM mode during play and "RAND" will flash.
(1)
When desired track is displayed, press PROG. button to set.
(c)
Repeat (b)~(c) to set up to 64 tracks. The display will show the
current set track.
(d)
Set tracks can be checked by pressing PROG. button.
(e)
TO COMPLETE THE PROGRAMMING AND TO PLAY
(2)
Press PLAY/PAUSE( ) button to start the
programmed tracks.
Press PLAY/PAUSE( ) button to play tracks in random order.
(2)
To cancel RANDOM mode, press MODE or STOP( ) button.
(3)
PROG
PROG
RAND
RAND
(1)
(a)
During play, press REW button to play previous track.
(2)
Press MODE button twice to repeat all tracks.
(2)
Press MODE button three times at stop mode
and "INTRO" will flash.
(1)
INTRO PLAY
MOVE TO THE DESIRED SPOT
During play, press and hold FF (or REW ) button
continuously to fast forward (or fast reverse) the current
track.
Press MODE button once to repeat one track.
(1)
REPEAT PLAY
Press REW button
1
Press PLAY/PAUSE( ) button to start INTRO play from
track No.1
(2)
INTRO
During pause mode, press FF (or REW ) button to
play the next track (or previous track).
(3)
Set tracks can be checked by pressing PROG. button.
(g)
Repeat (b)~(e) to set up to 99 tracks. The display will show the
current set track.
(d)
When desired folder is displayed, press PROG. button to set.
(c)
Press FF (or REW ) button to select the track number.
When desired track is displayed, press PROG. button to set.
(e)
(f)
display after the letter, press DEL.( ) to delete the letter.
(1)
INTRO PLAY
Press MODE button four times at stop mode and "INTRO"
will flash.
INTRO
Press PLAY/PAUSE( ) button to play tracks in random order.
(2)
To cancel RANDOM mode, press MODE or STOP( ) button.
(3)
