Read Me
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
Protect the power cord from being
walked on or pinched particularly at
plugs, and the point where they exit
from the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
If repairs are necessary, please use
qualified service personnel. Repairs may
be necessary if the device has been
damaged in any way. Such as the
power-supply cord or plug being
damaged, the device being exposed to
rain or moisture, objects falling into the
device, the device does not operate
normally, or has been dropped.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
FCC Notice to Users
FCC ID:
2AMSOSTW001
Caution: Changes or modifications not
expressly approved by the Party
responsible for compliance could void the
user’s authority to operate the
equipment.
Note: This equipment has been tested
and found to comply with the limits for
a
Class B digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection Against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications, however there is no
guarantee that interference will not occur
in
a
particular
installation.
If
this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
•
Reorient or relocate the receiving
antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced
radio/TV technician for Help.
The device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation. The Bluetooth
®
word mark and
logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of
such marks by Summit Electronics LLC is
under license. Other trademarks and
trade names are those of their respective
owner.
