Read Me
Model #: CSTW-43FD (FD #2101677)
Date Code: 2020-06
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth
7.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9.
Protect the power cord from being
walked on or pinched particularly at
plugs, and the point where they exit
from the apparatus.
10.
Only use attachments/accessories
specified by the manufacturer.
11.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
12.
If repairs are necessary, please use
qualified service personnel. Repairs
may be necessary if the device has
been damaged in any way. Such as the
power-supply cord or plug being
damaged, the device being exposed to
rain or moisture, objects falling into the
device, the device does not operate
normally, or has been dropped.
13. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
FCC Notice to Users
FCC ID: 2AMSOCSTW-43FD
Caution: Changes or modifications not
expressly approved by the Party responsible
for compliance could void the user’s authority
to operate the equipment.
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection Against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications, however there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving
antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced
radio/TV technician for Help.
The device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must
accept any
interference received, including
interference that may cause undesired
operation. The Bluetooth
®
word mark and
logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Summit Electronics LLC is under
license. Other trademarks and trade
names are those of their respective owner.
