Address
COBY Electronics Corporation
Technical Support
150 Knowlton Way
Savannah, GA 31407
Web
HYPERLINK
"http://www.cobyusa.com"www.cobyusa.com
Phone: 800-727-3592
Weekdays: 8:30AM-9:00PM EST
Saturdays: 9:00AM-5:30PM EST
I cannot turn the unit on.
Ensure that the Li-battery of speaker unit is fully
charged thru a USB cable connect to an AC
power or PC(PC must not be in sleep mode).
There is no sound during AUX In playback.
If a Bluetooth device is connected to the speaker,
disconnect it.
Ensure that the headphone jack of the audio
device is connected securely to the AUX In jack on
the back of the speaker unit.
Increase the volume level of the audio device;
then increase the volume level of the speaker unit.
The sound is distorted.
Ensure that all connections are secure.
Try reducing the volume level.
If your device supports it, try reducing the bass
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the connected
Bluetooth device to select a track.
3. To play the selected track, use the native
controls on the connected Bluetooth device
to play/pause.
4. Audio played through the connected
Bluetooth device will now be heard through
the speaker.
5. Use the native controls on the connected
Bluetooth device or unit to adjust the
volume.
Playing Audio Wirelessly
-9-
-8-
-10-
-11-
-12-
-13-
Play/Pause
When the player is in working mode.
Press to temporarily pause a playback;
press it again to resume the playback.
Hold down this button for 3 seconds to
disconnected the bluetooth connections, the
speaker will turn to searching other
matching bluetooth device when you hear
beep sounds.
Volume-
When the player is in working mode, press
to turn down the volume.
The minimum volume is near in silence.
When the player is in working mode, press
to turn up the volume.
You will hear the beep sound when you
turn up to the maximum volume.
Hands Free
Press this button to answer the phone call
in hands free when there is a phone call in.
Indicator
When the red and blue indicator lights are
flashing alternately, the player is searching
for a signal.
The blue indicator will flash once every 5
seconds when a player is connected, if the
device is not in the area of the paired unit.
The CSBT22 will return back to searching
status mode after 20 seconds.
The blue indicator keeps flashing once per
5 seconds means bluetooth was connected,
and the model of the player will shows on
mobile phone.
It is better to switch off the unit before
charging. The charging-indicator changing
from red to green indicates that the battery
has been fully charged.
When the battery is full depleted, a
beeping alert will sound. Recommending to
plug into a power source. Unit will
automatically switch off if no power is
detected.
1. Plug one end of a 3.5 mm audio input
cable into the 3.5 mm Audio Input on the unit.
2. Plug the other end of the cable into the
audio output/headphone output on an MP3
Player or other audio source.
3. Turn the unit on.
4. Audio played through the connected
device will now be heard through the
speakers.
Note: Any audio being played through a
connected Bluetooth Device will cease once
the 3.5mm Audio source is connected.
Using the 3.5mm Aux Audio Input
Pairing a Bluetooth Device
1. Turn on the unit and the Pairing
Indicator light will flash blue quickly.
When pairing, remain within 3 feet of the
unit.
2. Using the native controls on your
Bluetooth device (exp: Smartphone/
Computer/MP3 Player), select the
“CSBT22” in your Bluetooth settings to
pair.
If you have a problem with this device, please read
the troubleshooting guide below and check our
website at www.cobyusa.com for Frequently Asked
Questions (FAQs) and firmware updates. If these
resources do not resolve the problem, please
contact Technical Support.
Power supply
Speakers max output
Power consumption
DC-5V
2W X2
5W
Specifications:
If your device requests a password, enter
the default password “ 0000”. Refer to the
user’s manual for your specific device for
instructions on pairing and connecting
Bluetooth devices.
3. When successfully paired and
connected, the Pairing Indicator will
display a solid blue light and a beep will
sound from the unit.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
Bluetooth model:
CSBT22
Troubleshooting & Support
-14-
