Getting Started
Your Detector
Nothing
Comes Close to a Cobra
®
7
Getting Started
Your Detector
6
English
To Turn on the Unit and Adjust the Audio Volume
Rotate the
On-Off/Volume
control clockwise
(away from you).
Tone
Visual Display
Voice
Testing,
then
three beeps
Testing,
then
three beeps
System Ready
None
Voice Alert
Set-up is complete when the display continuously shows the City
or Highway icon and if these features are turned on: Compass,
IntelliMute, and Car Battery Voltage.
Power On/Off
•
On-Off/Volume Control
Rotate clockwise (away from you)
NOTE
In some vehicles, power is supplied to the cigarette lighter
even while the ignition is off. If this is the case with your
vehicle and you have turned the SmartPower off, you
should turn off or unplug your detector when parking for
lengthy periods. Cobra recommends leaving SmartPower
at the factory setting, which is on. See page 18.
NOTE
When the system is first turned on from new, only the
City or Highway icon will show on the screen because the
Show Compass, IntelliMute and Show Car Battery Voltage
functions are set to off at the factory. See pages 14, 16
and 19 to turn these functions on.
Settings Not Set
Power On
Standby Screen Icons
•
City Mode
Highway Mode
Compass
IntelliMute Up
IntelliMute Down
User Settings
Alert Settings
Battery Voltage
Your detector uses the following icons to indicate modes and functions when set:
Sample Screen
NOTE
For example, the sample screen indicates that
IntelliMute is active, the Compass is calibrated,
your system is set to Highway mode and your
vehicle’s battery voltage is charged to 13.8 volts.
Display Brightness Control
•
Your detector has a
Bright
display mode (for daytime driving)
and three levels of the
Dim
display mode:
■
Dim
for dusk driving.
■
Dimmer
for night driving.
■
Dark
to prevent all visual alerts from displaying.
The factory setting is Bright. This level can be changed
in programming mode (see page 19.)
You can toggle between Bright and Dim modes by pressing the
Dim
6
button.
NOTE
When you change to Dim mode, the unit will enter
whichever dim default mode is set at the time.
Dim
6
Button
Press and release
NOTE
The display will show
small dots to indicate
the unit is tuned on.
9376-XRS 9930 - 7 FINAL 2/23/06 11:59 AM Page 6
