IntelliMute Button
Press and release
Mute Button
Press and release
Settings
Your Detector
Nothing
Comes Close to a Cobra
®
9
Settings
Your Detector
8
English
Muting an Alert
Your detector allows you to quickly turn off an audio
Alert
by momentarily
pressing the
Mute
button. If you press the
Mute
button a second time
during the
Alert
, the audio
Alert
will be turned back on.
Auto Mute Mode
Auto Mute
will automatically reduce the audio volume of all alerts
after four seconds for as long as the signal is detected. The factory
setting for
Auto Mute
is on.
IntelliMute
IntelliMute
is a unique new feature that allows you to avoid alerts you
don’t need to hear because you are stopped or moving slowly. By sensing
the “revs” (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts (except for strobe signals from
emergency vehicles).
Before IntelliMute will work, you must set an activation point for your engine’s
revs (see page 11). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
each time the power is turned on. The factory setting is
IntelliMute
off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine’s revs. In such cases, you can reduce unwanted audio alerts
by using
Auto Mute
and
City
mode when appropriate.
To Turn Auto Mute Off
Press and release
the
Mute
button
while no alert
is occurring.
Tone
Voice
Visual Display
One beep
Auto Mute Off
None
To Turn Auto Mute On
Press and release
the
Mute
button
again while no
alert is occurring.
Tone
Voice
Visual Display
Two beeps
Auto Mute On
None
To Turn IntelliMute On
Press and release
the
IntelliMute
button.
Tone
Voice
Visual Display
Two beeps
IntelliMute On
Dot appears next to
the large character
on the right
To Turn IntelliMute Off
Press and release
the
IntelliMute
button again.
Tone
Voice
Visual Display
One beep
IntelliMute Off
Dot disappears
9493 XRS 9430-D-B2 4/10/06 11:54 AM Page 8
