Privacy Code Scan
•
Your microTALK
®
radio can automatically scan the
Privacy Codes
(either CTCSS 01 through 38 or DCS 01 through 83) within one channel.
Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1.
While in
Standby
mode, press and release the
Scan
button twice (CTCSS) or three times (DCS)
until the CTCSS or DCS icon and numbers are
flashing.
2.
Press and hold the
Scan
button to begin scanning
privacy codes within the selected channel.
17
The
Scan
icon will continue to be displayed when
privacy code scan is
on
. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain on
that channel/privacy code for 4 seconds.
Select Channel
Scan Privacy Codes
ME
M
ESC
Max Range
HI/LOW
Scan
PR561
Scan Button
ME
M
ESC
Max Range
HI/LOW
Scan
PR561
Channel Button
During scanning (while receiving an incoming transmission),
you can choose from the following:
a.
Press and hold the
Talk
button to communicate on that privacy code
within the selected channel. Your radio will remain on that privacy
code and return to
Standby
mode.
b.
Press the
Channel
Up
or
Channel
Down
button to resume
scanning.
c.
Press and hold the
Scan
button to return to
Standby
.
All manuals and user guides at all-guides.com
all-guides.com
