Cobra P20E, Инструкция по эксплуатации

Страница: 8 / 16

8 / Instruction Manual
2.2 Before using the pole saw
2.3 When using the pole saw
• Study this manual thoroughly
• Familiari s e yourself with the operation of the pole saw and learn to use it properly.
• Never allow others (especially children) who have not read the manual to use the
machine.
• If the unit must be given to other people, give them
this manual to study
• Never remove the labels or security elements.
• Check that the voltage and frequency indicated on the nameplate affixed to the
electric pole saw correspond to the power electricity supply.
• Check the oil level before each use. Never us
e the
pole saw without oil in the tank or
when the amount of oil is low.
•
Check the
condition of the guide bar, saw chain, fasteners and safety
components before each use. Replace excessively worn or missing parts.
• Do not turn on the machine if the chain side cover is not installed or when the guide
bar is damaged or missing.
• To connect the machine to the power supply, use only appropriate and compliant
equipment in perfect condition.
• Keep cord away from the radius of action of the saw and make sure it is not
subjected to tension. Move the cable away from water, heat and sharp edges.
• Do not cut near other electrical equipment. Do not put force on the power cable.
• Never use the cord for carrying, pulling or unplugging the machine.
• Do not use the machine if the Power On / O ff does not work properly. If necessary,
contact your dealer for any repair.
• Never expose the electric pole saw to rain or moisture. Never allow water or other
liquids to enter the machine.
• Do not operate the electric pole saw in environments with flammable items such as
liquids, gases or dust. The sparks generated by the operation of the machine can
cause an explosion.
• Do not start cutting until the work area is clear and clean
ed
properly. Keep the work
area clean and tidy to reduce the risk of accidents.
• During the first use, it is recommended that the user be accompanied by a
person experienced using pole pruning saws
.
• Operate the electric pole saw only in daylight or good artificial lighting.
• The use of power equipment can be regulated. Remember to comply with legal
regulations which may differ from one location to another.
• Do not use the machine if you are tired or ill. Also avoid use if you have consumed
alcohol or taken drugs. A moment of inattention can result in serious injury.
• Wear close-fitting clothing of good quality to help protect you rself from cuts. Always wear long
trousers , sturdy non-slip shoes, and protective equipment such as gloves,
goggles, a helmet with a visor and acoustic shield .
• Make sure the trigger switch is turned off before connecting the electric pole saw plug