background image

- 6 - 

Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where 

a key is fitted remove the key: 

- before clearing blockages or unclogging chute. 

- before checking, cleaning or working on the lawn mower. 

- after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawn 

mower. 

- If the lawn mower starts to vibrate abnormally (check immediately). 

Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where 

a key is fitted remove the key: 

- whenever you leave the lawn mower. 

- before refueling. 

Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the 

end of mowing. 

Maintenance and storage 

Keep all nuts, bolts and screws tight to be sure the equipment are in safe working condition. 

●Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark. 
●Allow the engine to cool before storing in any enclosure. Clean and maintain the lawnmower before storage. 
●To reduce the fire hazard; keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or 

excessive grease. 

●Check the grass catcher frequently for wear or deterioration. 
●Replace worn or damaged parts for safety. 
●If the fuel tank has to be drained, this should be done outdoors. 
●Improper maintenance, use of non-conforming replacement components, or the removal or modification of safety components 

can damage the lawnmower and injure the operators seriously. 

●Only use the recommended blades and spare parts by the manufacturer. The use of non-genuine parts can damage the 

machine and injure the operators. Keep the lawnmower in good working condition. 

●If the blade stopping device doesn’t work, please contact service center for help. 

Warning: 

Do not touch rotating blade. 

Warning: 

Refuel in a well ventilated area with the engine stopped. 

Содержание MX515SPBI




















Отзывы: