background image

- 14 - 

8. MAINTENANCE INSTRUCTIONS

 

SPARK PLUG 

Use only the original replacement spark plug. For best results, replace the spark plug every 100 hours of use.   

9. LUBRICATION INSTRUCTIONS 

CAUTION: 

DISCONNECT THE SPARK PLUG BEFORE SERVICING. 

.

 1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil. 

  2. ENGINE-Follow engine manual for lubrication instructions

 

10. CLEANING 

CAUTION: 

Do not hose the engine. Water can damage the engine or contaminate the fuel system. 

1. Wipe the deck with a dry cloth. 

2. Hose under the deck by tilting the mower so that the spark plug is up. 

10.1 ENGINE AIR FILTER 

CAUTION: 

Do not allow dirt or dust to clog the air filter foam element. 

The engine air cleaner element must be serviced (cleaned) after 25 hours normal mowing. The foam element must be serviced 

regularly if the mower is used in dry dusty conditions

TO CLEAN THE AIR FILTER

 

CAUTION: 

Do not allow dirt or dust to clog the air filter foam element. The engine air cleaner element must be serviced (cleaned) 

after 25 hours of normal mowing. The foam element must be serviced more regularly if the mower is used in dry dusty conditions. 

TO CLEAN THE AIR FILTER 

1.1 Remove the locking knob.( Fig.13A)

 

2. Remove the filter cover.   

3. Wash filter element in soap and water. 

  DO NOT USE PETROL!

 

4. Air dry the filter element. 

5. Place a few drops of SAE30 oil on the foam filter and squeeze tightly to remove any excess oil. 

6. Reinstall the filter. 

  Fig.13A 

 

  NOTE: Replace the filter if frayed, torn, damaged or unable to be cleaned.

 

 

10.2 CUTTING BLADE

 

  CAUTION:

 Be sure to disconnect and ground the spark plug wire before working on the cutting blade to prevent 

accidental engine starting. Protect hands by using heavy gloves or a rag to grasp the cutting blades. 

Tip the mower as specified in the separate engine manual. Remove the hex bolt and washer, which holds the blade and blade 

adapter to the engine crankshaft. Remove the blade and adapter from the crankshaft. 

 

When you change the blade, use the original type marked on the blade   

Содержание MX46SPH




















Отзывы: