background image

43

Nothing 

comes close to a Cobra

®

Advanced Operation

42 English

Advanced Operation

Memory Location Scan

During Memory Location Scan, the radio will rapidly switch
from memory location to memory location. Whenever any
activity is detected, the radio will stop the scan for ten (10)
seconds to allow you to listen briefly on that memory
location. It will then continue to scan unless you switch 
out of the Scan mode.

NOTE 
The radio must be squelched for the memory location
scan to function. See page 31 for squelch procedure.

NOTE 
If there are fewer than two (2) memory locations
programmed in the radio, the memory location 
scan option will not be available. To program at 
least two (2) memory locations, see page 40.

To Enter Memory Location Scan:

1. From Standby mode, press the Memory button. 

2. Press the Scan button. 

The radio will immediately begin to scan the channels you
programmed into the memory. The 

Scan and Memory icons

will show on the LCD. 

To Exit Memory Location Scan:

1. From Memory Location Scan mode, press the Scan

button. This will return the radio to Memory mode on the
last scanned memory location.

2. Press the Memory button to return to Standby mode on

the last channel shown before entering memory scan.

During Memory Location Scan (while receiving 
an incoming transmission), You Can Choose From 
The Following:

a. Press the Talk button to remain on that memory location

and end scanning. This will return the radio to Standby
mode.

b. Press the Channel Up or Channel Down button to

resume scanning memory locations.

If you do not press any buttons within ten (10) seconds,
your radio will automatically resume scanning memory
locations.

During Memory Location Scan (while not receiving a
transmission), You Can Choose From The Following:

a. Press the Talk button to communicate on the last

memory location scanned and return to Standby mode.

b. Press the Channel Up or Channel Down button to change

scan direction.

Memory Button

Scan Button

Memory Scan Mode

Operating Your  Radio

Operating Your  Radio

a

Talk or Channel Up/Down

b

79

A

68

69

71

72

78

A

Memory Location Scan

Содержание MRHH400




























Отзывы: