![background image](http://html1.mh-extra.com/html/cobra/microtalk-pr3000dxc/microtalk-pr3000dxc_owners-manual_2631249011.webp)
Customer Assistance
Warranty
Introduction
13
Nothing
comes close to a Cobra
™
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
12 English
Mode Functions
During privacy code scan (while receiving an incoming
transmission), you can choose from the following:
a.
Press and hold the
Talk
button to communicate on that
channel/privacy code. Your radio will remain on that
channel/privacy code and return to
Standby
mode.
b.
Press the
Channel Up
or
Channel Down
button to
resume scanning privacy codes.
If you press the
Talk
button while scanning and not within
10 seconds of receiving a transmission, you will transmit
on the channel/privacy code on which you last received a
transmission. This will return the radio to
Standby
mode.
If you do not press any button within 10 seconds, your radio
will automatically resume scanning privacy codes.
During privacy code scan (while not receiving a transmission),
you can choose from the following:
a.
Press and hold the
Talk
button to communicate on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last received a transmission.
This will return the radio to
Standby
mode.
b.
Press the
Mode
button to proceed to set VibrAlert
®
and/or Call Alert (see page 14 for further details).
c.
Press the
Lock
button to return to
Standby
mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last received a transmission.
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Privacy Code Scan
•
Your microTALK
®
radio can automatically scan the
Privacy Codes
(00 through 38) within one channel.
To scan privacy codes:
1.
While in
Standby
mode, press the
Channel Up
or
Channel Down
button
to choose the channel on which you
wish to scan privacy codes.
2.
Press the
Mode
button until the
Scan
icon and
the privacy code numbers flash on the display.
3.
Press the
Channel Up
or
Channel Down
button to begin scanning privacy codes
within the channel you selected.
The
Scan
icon will continue to be displayed when
privacy code scan is
on
. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain
on that channel/privacy code for 10 seconds.
While setting privacy code scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to
Standby
mode on
the channel/privacy code that was displayed
before you entered mode functions.
Channel Button
Mode Button
Select Channel
Scan Privacy Codes