Customer Assistance
Warranty
Introduction
13
Operation
10 Memory Locations
•
Your microTALK
®
radio has
10 Memory Locations
for storing
your most frequently used channels and channel/privacy code
combinations. These
Memory Locations
can be selected individually
or can be scanned. (See page 21 for memory location scan.)
To program a memory location:
1.
Press the
Mode
button until the
Memory
icon and the memory location
flash on the display.
2.
Press the
Channel Up
or
Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3.
Press the
Lock/Enter
button to enter
a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.
4.
Press the
Channel Up
or
Channel Down
button to select a channel (1 through 22).
5.
Press the
Lock/Enter
button.
The CTCSS icon and privacy code
numbers will flash on the display.
Channel Buttons
Memory Icon
Mode Button
Lock/Enter Button
LI7000WX.qxd:9813-LI6000 vB 9/29/06 11:41 AM Page 13
