Cobra microTALK CXT425, Руководство пользователя

Страница: 8 / 15

Customer Assistance Warranty Introduction Operation
Voice Activated Transmit (VOX)
•
In
VOX
mode, your microTALK radio can be used “hands-free,”
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid transmissions
triggered by background noise.
To turn VOX mode on or off:
1.
Press the Mode/Lock button until the VOX icon
flashes on the display. The current
on
or off setting is displayed.
2. Press the Channel Up or Channel Down button
to turn VOX
on
or
off
.
3.
Choose one of the following:
a. Press the Mode/Lock button to enter the
selected on or off setting and proceed to
other functions.
b.
Press the
Enter/Hi•Low
button to enter
the selected on or off setting and return
to
Standby
mode.
To set VOX sensitivity:
1.
Press the
Mode/Lock
button until the
VOX
icon
flashes and the current sensitivity level
is displayed.
10
Mode Functions
Operation
11
NOAA* All Hazards Radio Channels
•
You can use your microTALK radio to listen to NOAA All Hazards Radio
channels transmitting in your area.
To listen to All Hazards Radio channels:
1.
Press the Mode/Lock button until the
All Hazards Radio icon, the currently
selected All Hazards Radio channel,
and signal strength are displayed.
2. Use the Channel Up or Channel Down
button to change
All Hazards Radio
channels.
VOX Icon
Channel Buttons
Mode/Lock Button
Mode/Lock Button
Set DCS Privacy Codes
•
To select a DCS privacy code:
1.
After selecting a channel, press the
Mode/Lock
button until the DCS icon appears and the small
numbers flash on the display
(01 through 83).
2.
Press using the
Channel Up
or
Channel Down
button to select a DCS privacy code. You can
hold the
Up
or
Down
button for fast advance.
3.
When your desired DCS privacy code is
displayed, choose one of the following:
a.
Press the
Mode/Lock
button to enter the new
setting and proceed to other functions.
b.
Press the
Enter/Hi•Low
button to enter the
new setting and return to
Standby
mode.
c.
Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby mode.
3. The All Hazards Radio icon will continue to
be displayed when All Hazards Radio is on .
Choose one of the following:
a.
Press the
Mode/Lock
button to proceed
to other functions.
b. Press the Enter/Hi-Low button to exit
All Hazards Radio channel mode and
return to
Standby
mode.
c. Press Talk button to exit and start on
last used transmitting channel.
*National Oceanographic and Atmospheric Administration
Enter/Hi-Low Button
Channel Buttons
Channel Buttons
Mode/Lock Button
DCS Privacy Code
If CTCSS is turned
on
at the channel
selected, the display will flash the DCS
icon and “OFF. ” To switch from CTCSS to
DCS, press the
Channel Up
or
Channel
Down
button while the display is flashing
“OFF. ” The display will then show the
small numbers flashing and you will then
be able to proceed to step 2.
Hazards Radio Icon