Cobra MICROTALK CXR925C, Руководство пользователя

Страница: 5 / 18

Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Customer Assistance Warranty Introduction Operation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Using Your Radio
Channels
•
With the radio on , select any of the
22 channels by pressing the Channel Up
or
Channel Down
button.
Both radios must be tuned to the
same channel to communicate.
Channels 1 through 7 are shared by FRS and GMRS.
Channels 8 through 14 are FRS only. Channels 15
through 22 are GMRS only.
See page 26 for FRS/GMRS frequency
allocations and compatibility charts.
Listening for a Response
•
Release the
Talk
button to receive incoming
transmissions. Your microTALK
®
radio is always in
Standby mode while the Talk or Call buttons are
not pressed.
Call Button
•
To alert another person that you are calling:
–
Press and release the Call button.
The other person will hear a two (2) second
call tone. This tone is used only to establish voice
communications.
See page 24 on how to select from
10 available call tone settings.
To Illuminate Display
•
Press and release the Light/Max Range
button to illuminate the display for
10 seconds.
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Time-out Timer
•
The Time-out Timer feature limits transmit time to
three (3) continuous minutes to extend battery life
and prevent accidental operation. After three (3)
continuous minutes of transmission, the radio will
stop transmitting and will require a rest period of 30
seconds. During this time the display will flash on
and off, and an error tone will sound if the
Push-to-
Talk
button is pressed.
Selectable High•Medium•Low
Power Output
•
When in close proximity to another party or during
favorable conditions, you can switch from
High
to
Medium
to
Low Power
to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate exclusively
on low power.
To switch from high to medium to low power:
–
Press and release the
Hi•Low
button.
When in High Power and using Channels 1 through
7 and 15 through 22, the Hi icon will be visible in
the LCD display.
When in Medium Power and using Channels 1
through 7 and 15 through 22, the
Med
icon will be
visible in the LCD.
When in Low Power or while using channels 8
through 14, the Low icon will be visible in the
display.
When using an external speaker/
microphone accessory on channels 1-7
or 15-22, your microTALK
®
radio will only
operate on medium or low power.
LI 7300
Channel Button
Channel Number
Listening
LI 7300
Call Button LI 7300
Hi-Low Button
Hi Power Icon
Low Power Icon
Light/Max Range
Medium Power
Icon
Talk Button
4
English 5 Nothing Comes Close to a Cobra
®
CXR925C_ENG_MANL.indd 4-5 12/15/09 2:19 PM