7
5. ASSEMBLY
5.1 FOLDING HANDLE
1. Fix the lower handlebars into the unit body with a suitable spanner. (Fig.2F)
2. Lift the two locking levers to release the upper handlebars for folding.
3. Push the locking lever closed or tighten the knobs to lock the handlebars in the operating position. (Fig.2G/Fig.2H)
4. Adjust the tension by turning the lock nut with a suitable spanner.
5. Attach the cable-clamp to the position shown and then attach the cable. (Fig.2I)
Fig.2F Fig.2G
Fig.2H
Fig.2I
5.2 MOUNTING AND DISMOUNTING THE GRASS CATCHER
a) To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig. 3G/3H)
b) To remove: grasp and lift the rear cover, remove grass catcher. (Fig. 3G/3H)
Fig.3G Fig.3H
Lock nut