background image

24 English

25

Nothing 

Comes Close to a Cobra

®

Keystroke Tones On

Keystroke Tones

With 

Keystroke Tones

turned 

on

, your radio will sound 

beeps each time you press a button or change a setting.

To change keystroke tones:

1.

Press the 

Mode

button until the 

Keystroke

Tones

icon flashes on the display. The

current 

on

or 

off

setting is displayed.

2.

Press the 

Channel Up

or 

Channel Down

button to turn keystroke tones 

on

or 

off

.

3.

Choose one of the following:

a.

Press the 

Mode

button to enter the new

setting and return to 

Standby

mode.

b.

Press the 

Lock/Enter

button to enter the

new setting and return to 

Standby

mode.

Mode Functions

Operation

Customer Assistance

Warranty

Introduction

Operation

Mode Button

Channel Buttons

10 Call Tone Settings

You can choose from 10 different call tone settings to transmit 
a unique call alert. 

To change a call tone setting:

1.

Press the 

Mode

button until the 

letter “C” and the current call tone number 
(01 through 10) is displayed.

2.

Press the 

Channel Up

or 

Channel Down

button to hear the other call tone settings.

3.

Choose one of the following:

a.

Press the 

Mode

button to enter the new

setting and proceed to other functions.

b.

Press the 

Lock/Enter

button to enter the

new setting and return to 

Standby 

mode.

Roger Beep Confirmation Tone

Roger Beep

is an audible tone that your listener will hear when 

you release the 

Talk

button. This alerts the other party that you 

are finished talking and it is OK for them to speak.

To turn roger beep on or off:

1.

Press the 

Mode

button until the 

Roger Beep

icon flashes on the display. 

The current 

on

or 

off

setting is displayed.

2.

Press the 

Channel Up

or 

Channel Down

button to select roger beep 

on

or 

off

.

3.

Choose one of the following:

a.

Press the 

Mode

button to enter 

the new setting and proceed to other
functions.

b.

Press the 

Lock/Enter

button to enter the

new setting and return to 

Standby 

mode.

Roger Beep On

Call Tone  Setting

Mode Button

Channel Buttons

Mode Button

Channel Buttons

Содержание LI 6000WXC




















Отзывы: